One source. Every seal. Perfectly matched.
Precision Seal Kits,
Built to Your Spec
From O-rings to metallic seals — we develop fully customised seal kits using your original sample. Every kit engineered for pressure, temperature, and chemical resistance demands.
Seal types we customise
Every seal kit is built around your original — we reverse-engineer, match material, and manufacture to spec. Send us your sample; we handle the rest.
O-Rings
Radial and face-seal configurations in NBR, EPDM, FKM, PTFE, and silicone. For hydraulic, pneumatic, and static applications.
Oil Seals
Rotary shaft seals with single or double lip. Suitable for gearboxes, pumps, engines, and wheel hubs with grease or oil retention demands.
Metallic Seals
Ring joint gaskets, C-rings, E-rings, and spring-energised designs. For extreme pressure and temperature environments — flanges, valves, turbines.
CFT Seals
Carbon, Fibre & PTFE composite seals for chemically aggressive media. Excellent wear resistance for rotating and reciprocating surfaces.
Nylon Seals
Polyamide-based seals for low-friction, high-load environments. Common in hydraulic cylinders, rod guides, and light industrial machinery.
Custom Seals
Unique profiles, multi-material assemblies, or hard-to-source replacements. If you can send us the original, we can match or improve it.
Materials, ratings & applications
Choosing the wrong material leads to premature failure. Here’s a complete reference for every material we work with and where it belongs.
| Material | Temp. range | Pressure rating | Chemical resistance | Best for |
|---|---|---|---|---|
| NBRNitrile Rubber | –40°C to +120°C | Up to 400 bar | Petroleum oilsFuelsOzone ✗ | Hydraulic systems, fuel pumps, automotive seals |
| FKM / Viton®Fluoroelastomer | –20°C to +200°C | Up to 500 bar | AcidsFuelsAromatics | Chemical processing, aerospace, high-temp hydraulics |
| EPDMEthylene Propylene | –55°C to +150°C | Up to 350 bar | SteamWaterPetroleum oils ✗ | Water treatment, steam systems, brake fluid circuits |
| PTFEPolytetrafluoroethylene | –200°C to +260°C | Up to 700 bar (filled) | Almost all chemicalsSolvents | Pharma, food-grade, aggressive media, cryogenic |
| SiliconeVMQ / PVMQ | –60°C to +230°C | Up to 100 bar | OzoneUVFuels ✗ | Food contact, medical devices, low-pressure sealing |
| Nylon / PA66Polyamide | –40°C to +100°C | Up to 630 bar (guide) | Hydraulic oilsStrong acids ✗ | Hydraulic rod guides, wear rings, support elements |
| MetallicSS304 / SS316 / Inconel | –270°C to +700°C | Up to 1500 bar+ | High-temp gasesCorrosive media | Oil & gas flanges, turbines, subsea, high-pressure valves |
| CFTCarbon-Fibre / PTFE composite | –100°C to +280°C | Up to 800 bar | ChemicalsWear media | Reciprocating compressors, aggressive solvents, dry-running |
Operating specifications
Our seal kits cover a wide range of conditions. Below are the working envelopes across our full material range — specific ratings depend on material and seal type selected.
From your original to production kit
Send us your original seal or worn component. We develop, match, and return everything — original included.
Built around your needs
We’re not a catalogue supplier. Every kit is developed fresh from your original, with full traceability.
Fast lead times
Simple kits in as little as 1 day. Even high-complexity or bulk orders ship within 1 week. No weeks-long catalogue delays.
Original returned, guaranteed
We only borrow your original to reverse-engineer. It is always returned with your finished kit — no exceptions.
Any seal, any profile
Non-standard shapes, multi-lip designs, obsolete replacements — if we can measure it, we can make it.
Material traceability
Each kit comes with material grade confirmation. Critical for food, pharma, and oil & gas compliance requirements.
Ship your original. Get your kit.
1-day turnaround available. Original always returned.
Get in Touch →